Nachi PCR-4B-20A-FP-9262C B229900005731 motor de giro para JCB 8052 8056 8060 Sany SY55 SY55C SY60 miniexcavadora

1. Product Identification
Component: Main Hydraulic Swing Drive Motor Assembly (Dynamic Rotation Motor)

Manufacturer Model Number: Nachi PCR-4B-20A-FP-9262C (PCR Series Architecture)

OEM Cross-Reference Part Numbers:

JCB: B229900005731

Kobelco: 2441U814F1

Takeuchi: 19031-20200, 19031-22000, 19031-20100, 19031-25500 (1903120200, 1903122000, 1903120100, 1903125500)

Machine Compatibility:

JCB: 8052, 8056, 8060

Sany: SY55, SY55C, SY60

Komatsu: PC50, PC56

Kobelco: SK60

Yuchai: YC55

Takeuchi: TB145, TB153FR Mini Excavators

Condition: Genuine Original New / Premium OEM Specification Equivalent

2. Technical Specifications
Motor Type: Variable/Fixed Displacement Axial Piston Swing Motor with Integrated Reduction Gearbox

Output Performance: High-torque and precision flow profiles engineered specifically for 5.0 to 6.0-ton mini excavator upper-structure rotation.

Integrated Control Network: Features dual crossover relief valves, anti-cavitation check valves, and an automatic mechanical parking brake to ensure smooth stopping and prevent boom drift.

Drive Interface: Precision mounting flange and heavy-duty output shaft designed for direct mating with the slew ring / swing gear mechanism.

3. Critical Installation Requirements
Swing Motor Housing Priming (Mandatory)
Before starting the engine or engaging the swing function, manually fill the swing motor casing with clean, fresh hydraulic oil through its highest case drain port. Operating an axial piston motor dry—even for a few seconds—will score the swash plate and piston slippers, leading to immediate total pressure loss.

Verify Case Drain Line Backpressure
Inspect the low-pressure case drain hose back to the main hydraulic tank. Ensure there are no sharp bends, kinks, or restrictions. High backpressure in the case drain line will instantly blow out the main motor shaft seal.

System Air Bleeding & Startup Procedure
After mounting and filling the housing, loosen the air bleed port on top of the motor block. Crank the engine with the fuel delivery disabled until clear, bubble-free hydraulic oil flows out, then retighten. Allow the machine to idle under no load for 10 to 15 minutes to purge remaining air from the loop.

Hydraulic System Decontamination
If replacing a motor that suffered internal mechanical breakdown, thoroughly drain and flush the main hydraulic reservoir, clean oil cooler lines, and replace all return, suction, and pilot filter elements before running the machine.

4. Frequently Asked Questions (FAQ)
Q: Are Takeuchi part numbers 19031-20200, 19031-22000, 19031-20100, and 19031-25500 fully interchangeable?
A: Yes. These part numbers represent standard Takeuchi factory revisions, supersessions, and dash updates for the TB145 and TB153FR series. They all cross-reference directly to the Nachi PCR-4B-20A platform with identical physical frame dimensions, port threads, and mounting bolt patterns.

Q: My excavator's upper structure drifts or over-swings when stopping on a slope. Is the swing motor at fault?
A: Over-rotation or uncontrolled drifting under load generally indicates worn internal friction brake discs, compromised crossover shock-relief valve seats, or scored wear plates inside the swing motor. Installing a new assembly restores exact position holding and swing responsiveness.

Q: Does this unit arrive complete with the control valve manifold installed?
A: Yes. The unit is delivered fully assembled as a single complete drop-in replacement, including the axial piston motor section, integrated planetary gearbox stage, and pre-calibrated valve manifold block.

5. Shipping & Logistics
Packaging: Preserved with rust-inhibiting storage oil, fitted with heavy-duty port plugs, and bolted securely inside an export-safe wooden crate.

Transit Time: Global express air freight via DHL/FedEx/UPS typically delivers within 3 to 7 business days directly to your workshop or job site.