PamaTec OEM Heidelberg PT 220 máquina perforadora de papel

Marke: PamaTec OEM Heidelberg
fully automatic inline bridge punching machine PamaTec OEM Heidelberg PT-220
configured for longitudinal cutting
steel rule cutting
line tools and cross cutting
Punches folded layers and single sheets behind the folding machine or saddle stitcher
Depending on the product length and thickness
the maximum cycle speed is 7,500 copies per hour
The maximum die-cutting format is designed for 600 x 220 millimeters
A wide range of finishing options can be implemented: Tear-off or corner perforation
Wire-O punching and filing holes
Parting
register and three-side trimming are possible
as are steel rule cuts for individual die cutting
the tools needed for this are not included !!!
The product thicknesses that can be processed are four millimeters for cutting
for perforating at three millimeters and for steel rule cutting at two millimeters
Sheets are transferred directly from the folding machine or saddlestitcher with a height-adjustable belt feeder
A pneumatic alignment system ensures accurate positioning of the sheets in the die cutter
and thus for high punching accuracy
Inlet width 70 cm
Working width 60 cm
Equipment
Belt conveyor for 2 panels with 4 conveyor belts 15 mm wide
1 receptacle for longitudinal cutting
Cutout tool (width 6mm optional 8-10-12-15mm are also available
2 receptacles for line tools punching pattern Euro perforation
Recording strip steel cutting
pre-direction
Transfer outlet
TF interface
Explanation cutting types
Steel strip cutting: any shape punching up to 2 mm thickness
Longitudinal cut: head and foot trim
separating cut
strip cutout
Cross section: cutting work at right angles to the direction of paper travel
e.g. front trim
Line perforation: e.g. corner perforation
Wire-O or filing perforation
Central lubrication to supply all bearing points with grease for the drive
This should be operated at least once a day
The progressive distributor ensures uniform greasing